Dirt Bikes Expert

An Easy Guide to Installing and Maintaining a Dirt Bike Light Bar

Dirt Bike Light Bar

Do you want to take your dirt bike to an advanced level? Do you notice how awesome it would be to enjoy the ride at night time across your terrains and trails with an amazing light bar? You have arrived at the right destination if your response is affirmative.

Maintaining and installing the light bar of a dirt bike seems very problematic. Our guide will give you a simple and easy process of getting the installation of a light bar easily. If you read our post on dirt bike maintenance, you will know all about your dirt bike.

We have offered everything relevant to wiring configuration, installation procedures, troubleshooting and fixing. It is our best thing to keep all things at an optimal level. You need to get ready to hit all these trails after sundown.

Finding The Best Dirt Bike Light Bar

Light bar on dirt bike

Whether blazing down a trail in the light of day or winding through rugged terrain after dark, a light bar on your dirt bike can provide the light necessary to navigate any course safely. With so many options available, researching the best light bar for your dirt bike is important.

Make sure you look at brightness levels, light coverage area, light beam patterns, and durability to choose the light bar that fits your dirt biking needs.

You should also think about factors like weather resistance and affordability before making a final decision. In the end, by conducting thorough research, you’ll be able to discover the ideal light bar for your dirt bike and relish extended hours of riding delight.

Tools and supplies you want to install it

  1. Drill
  2. 3/8 drill bit
  3. 1/4 drill bit
  4. Screwdriver
  5. Utility knife
  6. Wire cutters
  7. Electrical tape
  8. Light bar
  9. Mounting brackets
  10. Bolts
  11. Washers
  12. Nuts

How To Mount Dirt Bike Light Bar Properly

Before you start the process of light installation, you must have the material and all tools in line. You need a light bar, screw drive and mounting brackets. Once you fix these brackets, you must make use of the drill light bars.

Next, you must align these bars with holes and frames. Once you adjust them in the following positions, you can make use of screws and other formats onto the frame. It is better to connect the harness and plug the power link into the dirt bike battery.

Wiring installation types

Dirt bike bar installation is easy to do for the enjoyment of riding at night. You need some wire required for installation. However, you must understand it first. It is a good way to customize your experience for dirt bike installation.

You must understand the wiring types because it is crucial for your lighting bar. There is a need for some expertise in getting knowledge and wiring of the installation.

Connect the battery power source and switch correctly

Dirt bike battery

Lighting up the night on your dirt bike with a light bar can add much-needed flare and, even more importantly, visibility. But before you head out and light up the trail, it’s important to connect your light bar’s power source and switch correctly.

The power must be safely connected to the battery and activated from its own switch to get the most out of your light bar.

Doing this yourself is quite easy if you take some mindfulness to follow all safety precautions, ensure all connections are tight, and functionally test each component before mounting it in its final location.

Test out the light bar after installation to make sure everything works properly

After spending hours installing a light bar on your dirt bike, it’s important to verify that it works properly before hitting the trails. To verify the light bar’s functionality, it is crucial to confirm that each light within the bar is emitting light correctly and operating as intended.

Additionally, if you plan on adding light switches or other components to your light bar setup, those should be tested before heading out.

By testing everything, you can be sure all of these parts are functioning correctly and enjoy an exciting ride without worrying about technical difficulties.

Tips on maintaining a dirt bike light bar, including cleaning and storage instructions

Check the light bar regularly

The first step in maintaining your dirt bike light bar is to check it regularly. It is important to check that the light bulbs are functional and that the light bar is free from any cracks or damages. If you notice any damage, you should replace the light bar immediately.

Clean the light bar regularly

It is also important to clean your dirt bike light bar regularly. To clean the light bar, you can use a soft cloth and mild soap for the exterior while the interior can be cleaned using a brush. Make sure that you rinse the light bar thoroughly after cleaning it.

Store the light bar properly

When not in use, it is advisable to store your light bar in a location that is dry and devoid of light. Rust or corrosion may occur if the item is kept in a damp or moist setting. Additionally, if you store it in a bright environment, the sunlight can fade the light bar’s color over time.

Do not expose the light bar to extreme temperatures

You should also avoid exposing your light bar to extreme temperatures. In case of an excessive rise in temperature, the object may melt, while a significant drop in temperature may cause it to fracture.

If you must store your light bar for dirt bikes in an extreme temperature environment, ensure that you do so for a short time only.

Keep the light bar away from water

Keeping your light bar away from water is also important. Water can damage the electrical components of the light bar, and it can also cause rusting or corrosion. If you must wash your dirt bike, ensure you do not get any water on the light bar.

Do not use harsh chemicals on the light bar

You should also avoid using harsh chemicals on your light bar. Harsh chemicals can damage the finish of the light bar and cause rusting or corrosion.

When cleaning your dirt bike with a chemical cleaner, ensure that you opt for a product that is exclusively formulated for motorcycle use.

FAQs on Dirt Bike Light Bar

Light bar on a dirt bike

What is a dirt bike light bar? 

A light bar for a dirt bike is a light mounted on the front of a dirt bike. The light bar typically has multiple LED lights that illuminate the path ahead of the bike.

Why do I need a dirt bike light bar? 

There are several reasons why you may need a light bar for your dirt bike. A light bar can be useful for enhancing your vision of the path ahead, especially when you ride your bike frequently at night or in low-light conditions.

Moreover, a light bar can be advantageous for off-road racers as it enables them to spot other racers and detect any hurdles in their way.

How do I choose the right dirt bike light bar for my needs? 

When considering purchasing a light bar for your dirt bike, there are several factors that you should take into consideration. First, consider where you will use the light bar most frequently. If riding in dark conditions, you will need a light bar with high lumens.

However, riding in relatively well-lit conditions, you can get away with a lower lumen output. Additionally, consider the size and weight of the light bar.

For those who engage in extensive off-road riding, a light bar that is lightweight and compact is ideal as it will only add minimal weight to their bike.

How do I install a dirt bike light bar? 

Installing a light bar on a dirt bike is a fairly simple process. Most light bars come with all of the necessary mounting hardware and instructions.

However, you may need help to install your particular light bar. In that case, it is always best to consult an experienced mechanic or watch an installation video online before proceeding.

What are some of the best dirt bike light bars on the market? 

There are many great dirt bike light bars on the market today. Some of our top picks include the Baja Designs Squadron Pro LED Light Bar, the Rigid Industries D-Series Pro LED Light Bar, and the Vision X XIL-OE LED Light Bar

How much does a dirt bike light bar cost? 

The cost of a light bar for a dirt bike can vary depending on factors such as size, lumens output, and features. However, most decent-quality light bars cost between $100 and $300.

About The Author

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top